Ambition Vibe Wireless Battery

Upgrade Touch Button&Big Battery Capacity: The battery of the vibe tattoo machine adopts high-sensitivity touch buttons more convenient to operate. The screen displays the machine's working voltage, current, remaining power, Hertz and timer. Battery capacity is 2400 mAh, can work for more than 7 hours at an output voltage of 8V, and the two batteries can be used for more than 14 hours in total, equipped with a jumpstart start function, even big mags can be pushed.

Note: The Vibe wireless battery is only compatible with the Vibe wireless tattoo machine.

Instructions for use:

- Power ON/OFF: Long touch "O" key for 3 seconds

- Output pause / resume: Short touch "O" key to pause the output, and short touch it again to resume the output(the resume voltage is the working voltage before the pause).

- Adjust output voltage: Touch the "+" or"-" key to adjust output voltage. The voltage can be adjusted through button (+) and (-) respectively with the voltage of 0.1V on each touch.

- Working time: The working time can be accurate to seconds. When the power is turned off, the time will be cleared. When the output is paused, it will also stop counting.

Power: The LED display will show the remaining power. Fast charging through the matching fast-charging Type-C data cable can usually be fully charged about 3 hours.

Please pay attention to the change of power at any time to prevent sudden power loss from affecting your tattooing work.

Tips: Our products are 100% brand new. There is a protective film on the screen. There may be a small amount of scratches during the production, packaging and transportation. Just tear off the protective film after receiving the machine.